Course Content
Introduction
Here is what to expect
0/3
About the Exam
Resourses
About The Course
Unit 1A: Purpose and Technique (50%) (Purpose)
A. Purpose of radiographic images 1. Periapical 2. Bitewing 3. Full mouth series 4. Occlusal 5. Full-mouth survey 6. Panoramic 7. Cephalometric 8. CBCT (cone-beam computed tomography) B. Technique 1. Review patient medical and dental histories for contraindications, including medications. 2. Intraoral techniques, including error correction. a. Paralleling b. Bisecting angle 3. Extraoral techniques, including error correction. a. Panoramic b. Cephalometric c. CBCT (cone-beam computed tomography) basics 4. Technique modifications based on anatomical variations and clinical conditions. 5. Purpose and maintenance of radiographic equipment. 6. Patient management techniques. 7. Mounting and anatomical landmarks that aid in mounting. 8. Anatomical structures and dental materials observed on images (e.g., differentiating between radiolucent and radiopaque areas). 9. Features of a diagnostically acceptable image. 10. Prepare images for legal requirements (e.g., HIPAA).
0/19
Purpose of Radiographic Images
06:55
Periapical Radiographs (PA)
01:58
Bitewing Radiographs (BWX)
01:40
Full Mouth Series (FMX)
Occlusal Radiographs
Full-mouth survey
Panoramic Radiography
Cephalometric Radiography
Cone-Beam Computed Tomography (CBCT)
Technique
Anatomy Flashcards
Quadrants, Regions, and Tooth Numbering Systems
Practice and Review
Additional Insights
Final Unit Lesson: Reviewing Radiographic Imaging Techniques
Unit I A Practice quiz
Matching Assignment: Types of Radiographs and Their Purposes
Matching Quiz: Types of Radiographs and Their Purposes
Film/Sensor Holding Devices
Unit 1B Purpose and Technique (50%) (Technique)
0/12
Reviewing Patient Medical and Dental Histories for Contraindications, Including Medications
Techniques: Intraoral Techniques, Including Error Correction
Extraoral Techniques, Including Error Correction
Technique Modifications Based on Anatomical Variations and Clinical Conditions
Equipment Purpose & Maintenance
Patient Management Techniques in Dental Radiography
Mounting and Anatomical Landmarks in Dental Radiography
Anatomical Structures and Dental Materials in Dental Radiography
Features of a Diagnostically Acceptable Image in Dental Radiography
Legal Requirements & Image Preparation
Unit 1B Practice Quiz
The Nature of X-rays (Physics Basics)
06:34
Unit 2A: Radiation production (25%)
Radiation production. 1. Sources of radiation for operators/other staff during radiation production. 2. Factors affecting x-ray production (e.g., kVp, mA, exposure time). 3. Radiation characteristics. 4. Radiation physics. a. Primary. b. Scatter (secondary). 5. Radiation biology. a. Short-and long-term effects of radiation on cells and tissues. b. Concepts of radiation dose.
0/8
Sources of radiation for operators/other staff during radiation production
Factors Affecting X-ray Production
Radiation Characteristics and Interactions with Matter
Radiation Production Sources
Radiation Safety and Patient Exposure
Radiation Physics in Dental Imaging
Radiation Biology and Effects on Dental Tissues
Unit 2A Summary: Radiation Health and Safety in Dental Imaging
Unit 2B: Radiation Safety
Radiation safety. 1. Causes of unnecessary exposure to radiation. 2. Patient exposure to radiation (ALARA, ADA recommendations). 3. Factors that influence radiation safety (e.g., filtration, shielding, collimation, PID length). 4. Patient radiation concerns. 5. Informed consent or patient refusal for exposure to radiation. 6. Protocol for suspected x-ray machine malfunctions.
0/9
Radiation Safety: Causes of Unnecessary Exposure to Radiation
Patient exposure to radiation (ALARA, ADA recommendations)
Factors that Influence Radiation Safety (Filtration, Shielding, Collimation, PID Length)
Patient Radiation Concerns and Informed Consent
Informed Consent and Patient Refusal for Exposure to Radiation
Protocol for Suspected X-ray Machine Malfunctions
Summary of Unit II: Radiation Safety
Practice and Review
Unit 2 Practice Quiz
Unit 3A: Standard precautions for equipment and supplies (25%)
Standard precautions for equipment and supplies according to ADA, CDC and OSHA, including but not limited to: 1. breakdown and setup of treatment room. 2. barriers. 3. position indicating and beam alignment devices. 4. clinical contact surfaces. 5. critical and semi-critical instrument sterilization
0/7
Introduction to Unit IIIA: Standard Precautions for Equipment and Supplies
Breakdown and Setup of Treatment Room
Use of Barriers and Position Indicating Devices (PIDs)
position indicating and beam alignment devices.
Clinical Contact Surface Maintenance
Critical and Semi-Critical Instrument Sterilization
Unit 3A Summary
Unit 3B: Standard precautions for patients and operators
Standard precautions for patients and operators according to ADA, CDC and OSHA, including but not limited to: 1. hand hygiene. 2. PPE (donning, doffing). 3. cross contamination.
0/8
Hand Hygiene and Infection Control
Personal Protective Equipment (PPE) Protocol
Cross Contamination Prevention Strategies
Government Agencies and Associations
Infection Control and Hazardous Materials Management
Unit IIIA: Comprehensive Summary
Unit IIIB: Summary Standard Precautions for Patients and Operators
Unit 3 Practice Quiz
Vocabulary Terms
0/1
Glossary of Vocabulary Terms
Practice Exams
0/1
RHS Practice Test
RHS Exam Prep

Unit 3A Comprehensive Summary: Standard Precautions for Equipment and Supplies

Overview

Unit 3A focused on standard precautions for dental equipment and supplies in accordance with guidelines and recommendations from the ADA, CDC, and OSHA. Topics covered ranged from the breakdown and setup of treatment rooms to the specific protocols for sterilizing critical and semi-critical instruments. The unit aimed to equip dental assistants with the necessary skills and knowledge to maintain a safe and hygienic environment for both patients and healthcare providers.

Key Concepts

  1. Breakdown and Setup of Treatment Room: Detailed the best practices for decontaminating and preparing the dental treatment room before and after each patient. The module highlighted the importance of having a systematic procedure for this to ensure no steps are missed.

  2. Barriers: Explored the use of surface barriers to minimize contamination. This included placing protective sheets or plastic wraps on surfaces and equipment that are frequently touched during dental procedures.

  3. Position Indicating and Beam Alignment Devices: Discussed how these devices guide the direction of the X-ray beam during radiographic procedures. Proper sterilization and positioning of these devices were stressed to ensure patient safety.

  4. Clinical Contact Surfaces: Explained the cleaning and disinfection protocols for surfaces that come into direct contact with patients, dental providers, or contaminated instruments.

  5. Critical and Semi-Critical Instrument Sterilization: Distinguished between the two types of instruments and elucidated sterilization techniques suitable for each. This included steam autoclaving and chemical sterilants for high-level disinfection.

Exam Vocabulary

  • Sterilization
  • Autoclave
  • Critical Instruments
  • Semi-Critical Instruments
  • Surface Barriers
  • Position Indicating Device (PID)

Practical Implications

  • Breakdown and Setup: Ensuring that the treatment room is cleaned and set up correctly minimizes cross-contamination risks.

  • Barriers: These provide an additional layer of infection control, particularly on hard-to-clean surfaces and equipment.

  • Sterilization: Proper sterilization techniques ensure that reusable dental instruments do not serve as vectors for disease transmission.

Conclusion

Unit 3A provided an in-depth understanding of the standard precautions necessary for handling equipment and supplies in a dental setting. Compliance with ADA, CDC, and OSHA guidelines is not just mandatory but forms the cornerstone of patient and practitioner safety in dental healthcare. By mastering the concepts covered in this unit, dental assistants are better prepared to uphold the highest standards of safety and hygiene.

Previous
Next