Course Content
Introduction
Here is what to expect
0/3
About the Exam
Resourses
About The Course
Unit 1A: Purpose and Technique (50%) (Purpose)
A. Purpose of radiographic images 1. Periapical 2. Bitewing 3. Full mouth series 4. Occlusal 5. Full-mouth survey 6. Panoramic 7. Cephalometric 8. CBCT (cone-beam computed tomography) B. Technique 1. Review patient medical and dental histories for contraindications, including medications. 2. Intraoral techniques, including error correction. a. Paralleling b. Bisecting angle 3. Extraoral techniques, including error correction. a. Panoramic b. Cephalometric c. CBCT (cone-beam computed tomography) basics 4. Technique modifications based on anatomical variations and clinical conditions. 5. Purpose and maintenance of radiographic equipment. 6. Patient management techniques. 7. Mounting and anatomical landmarks that aid in mounting. 8. Anatomical structures and dental materials observed on images (e.g., differentiating between radiolucent and radiopaque areas). 9. Features of a diagnostically acceptable image. 10. Prepare images for legal requirements (e.g., HIPAA).
0/19
Purpose of Radiographic Images
06:55
Periapical Radiographs (PA)
01:58
Bitewing Radiographs (BWX)
01:40
Full Mouth Series (FMX)
Occlusal Radiographs
Full-mouth survey
Panoramic Radiography
Cephalometric Radiography
Cone-Beam Computed Tomography (CBCT)
Technique
Anatomy Flashcards
Quadrants, Regions, and Tooth Numbering Systems
Practice and Review
Additional Insights
Final Unit Lesson: Reviewing Radiographic Imaging Techniques
Unit I A Practice quiz
Matching Assignment: Types of Radiographs and Their Purposes
Matching Quiz: Types of Radiographs and Their Purposes
Film/Sensor Holding Devices
Unit 1B Purpose and Technique (50%) (Technique)
0/12
Reviewing Patient Medical and Dental Histories for Contraindications, Including Medications
Techniques: Intraoral Techniques, Including Error Correction
Extraoral Techniques, Including Error Correction
Technique Modifications Based on Anatomical Variations and Clinical Conditions
Equipment Purpose & Maintenance
Patient Management Techniques in Dental Radiography
Mounting and Anatomical Landmarks in Dental Radiography
Anatomical Structures and Dental Materials in Dental Radiography
Features of a Diagnostically Acceptable Image in Dental Radiography
Legal Requirements & Image Preparation
Unit 1B Practice Quiz
The Nature of X-rays (Physics Basics)
06:34
Unit 2A: Radiation production (25%)
Radiation production. 1. Sources of radiation for operators/other staff during radiation production. 2. Factors affecting x-ray production (e.g., kVp, mA, exposure time). 3. Radiation characteristics. 4. Radiation physics. a. Primary. b. Scatter (secondary). 5. Radiation biology. a. Short-and long-term effects of radiation on cells and tissues. b. Concepts of radiation dose.
0/8
Sources of radiation for operators/other staff during radiation production
Factors Affecting X-ray Production
Radiation Characteristics and Interactions with Matter
Radiation Production Sources
Radiation Safety and Patient Exposure
Radiation Physics in Dental Imaging
Radiation Biology and Effects on Dental Tissues
Unit 2A Summary: Radiation Health and Safety in Dental Imaging
Unit 2B: Radiation Safety
Radiation safety. 1. Causes of unnecessary exposure to radiation. 2. Patient exposure to radiation (ALARA, ADA recommendations). 3. Factors that influence radiation safety (e.g., filtration, shielding, collimation, PID length). 4. Patient radiation concerns. 5. Informed consent or patient refusal for exposure to radiation. 6. Protocol for suspected x-ray machine malfunctions.
0/9
Radiation Safety: Causes of Unnecessary Exposure to Radiation
Patient exposure to radiation (ALARA, ADA recommendations)
Factors that Influence Radiation Safety (Filtration, Shielding, Collimation, PID Length)
Patient Radiation Concerns and Informed Consent
Informed Consent and Patient Refusal for Exposure to Radiation
Protocol for Suspected X-ray Machine Malfunctions
Summary of Unit II: Radiation Safety
Practice and Review
Unit 2 Practice Quiz
Unit 3A: Standard precautions for equipment and supplies (25%)
Standard precautions for equipment and supplies according to ADA, CDC and OSHA, including but not limited to: 1. breakdown and setup of treatment room. 2. barriers. 3. position indicating and beam alignment devices. 4. clinical contact surfaces. 5. critical and semi-critical instrument sterilization
0/7
Introduction to Unit IIIA: Standard Precautions for Equipment and Supplies
Breakdown and Setup of Treatment Room
Use of Barriers and Position Indicating Devices (PIDs)
position indicating and beam alignment devices.
Clinical Contact Surface Maintenance
Critical and Semi-Critical Instrument Sterilization
Unit 3A Summary
Unit 3B: Standard precautions for patients and operators
Standard precautions for patients and operators according to ADA, CDC and OSHA, including but not limited to: 1. hand hygiene. 2. PPE (donning, doffing). 3. cross contamination.
0/8
Hand Hygiene and Infection Control
Personal Protective Equipment (PPE) Protocol
Cross Contamination Prevention Strategies
Government Agencies and Associations
Infection Control and Hazardous Materials Management
Unit IIIA: Comprehensive Summary
Unit IIIB: Summary Standard Precautions for Patients and Operators
Unit 3 Practice Quiz
Vocabulary Terms
0/1
Glossary of Vocabulary Terms
Practice Exams
0/1
RHS Practice Test
RHS Exam Prep

Intraoral Imaging Techniques

Mastering Angulation and Placement

🎯 Learning Objectives

  • Identify the 5 Basic Rules of the Paralleling Technique.
  • Understand the difference between Vertical and Horizontal angulation.
  • Differentiate between the Paralleling and Bisecting techniques.
  • Identify the “PID” and its role in directing the central ray.

1. The Paralleling Technique

This is the Standard of Care in dental radiography. It is called “paralleling” because the sensor is placed parallel to the long axis of the tooth, and the central X-ray beam is directed perpendicular (at a 90-degree angle) to both.

The 5 Rules for Success:

  1. Placement: Sensor must cover the specific teeth being examined.
  2. Position: The sensor must be parallel to the tooth’s long axis.
  3. Vertical Angulation: The central ray must be perpendicular to the tooth and sensor.
  4. Horizontal Angulation: The central ray must be directed through the contact areas.
  5. Film Exposure: The X-ray beam must be centered on the sensor to avoid “Cone Cutting.”

2. Mastering Angulation

Angulation refers to the alignment of the central ray of an X-ray beam. On the exam, you must know what happens when these angles are wrong.

Horizontal Angulation

Side-to-side movement of the PID.
Error: Overlapping contacts.

Vertical Angulation

Up-and-down movement of the PID.
Error: Elongation or Foreshortening.

3. Shadow Casting Rules

To produce a sharp, accurate image, we follow the geometric principles of shadow casting:

  • Small Focal Spot: Reduces blurring (penumbra).
  • Long Target-Object Distance: Using a long PID (16-inch) reduces magnification.
  • Short Object-Sensor Distance: The sensor should be as close to the tooth as possible (except during paralleling).

🚨 DANB EXAM ALERT: Elongation vs. Foreshortening

Foreshortening: Teeth look short and “squished.”
Cause: Too much (excessive) vertical angulation.

Elongation: Teeth look long and “stretched.”
Cause: Too little (insufficient) vertical angulation.

Exercise Files
.
Size: 0.00 B
Previous
Next